Alpina Sports // Website
Uncompromising protection

A cycling helmet must protect your head. No ifs, no buts. All of our helmets comply with the necessary standards, and are rigorously tested. A helmet must also fit well, and be light and well-ventilated. That is why we constantly develop and optimise all materials, technologies and manufacturing processes.

ÜBERSETZUNG FEHLT

Uncompromising Protection

A cycling helmet must protect your head. No ifs, no buts. All of our helmets comply with the necessary standards, and are rigorously tested. A helmet must also fit well, and be light and well-ventilated. That is why we constantly develop and optimise all materials, technologies and manufacturing processes.

TECHNOLOGIEN DIE IN UNSEREN RADHELMEN STECKEN

For more adjustment possibilities

Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several steps. This allows the optimal fit of the helmet to be adjusted for a wide variety of head shapes. Pressure marks are a thing of the past, the helmet sits perfectly on the head and safety is improved.

 

 

Proven a hundred thousand times over and used on all Alpina helmets: the strap buckle with the red push button and multi-step automatic locking mechanism. Ergomatic can be operated with one hand - you can loosen the strap on the way up the mountain and tighten it for downhill - and in a fall the locking mechanism cannot open automatically.

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The Run System Classic scores points for its price/performance ratio. It is a simple and sturdy wheel that holds the helmet securely in place where it belongs: on the head.

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The Run System Classic scores points for its price/performance ratio. It is a simple and sturdy wheel that holds the helmet securely in place where it belongs: on the head.

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The Run System Ergo Flex is the lightest, most comfortable adjustment system offered by Alpina. The delicate design clings evenly to the head and thus increases protection. The Run System Ergo Flex can be adjusted using fine increments – there’s no helmet more lightweight, more comfortable or with a more custom fit.

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The valuable Run System Ergo+ has two large wing-shaped head supports that make it comfortable to wear. The difference from the Run System Ergo Pro: the head supports do not have rubber coating.

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The two large wing-shaped head supports are distinctive features on the high-quality Run System Ergo Pro. They are made from a two-component mix of plastic and rubber. This guarantees a high level of comfort. Since 2014, the Run System Ergo Pro has been available in colours to match the helmet.

A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixing of the two straps under the ear plays a decisive role. The Y-clip system ensures a millimetre-accurate adjustment - in a matter of seconds.

For more comfort

One factor that greatly influences comfort when wearing is the ventilation of the helmet. The strategically sensible arrangement of the vents is crucial for optimum ventilation of the interior. The air is directed into the interior, guided around the head and can flow out again at the back. The head is therefore comfortably air-conditioned at all times.

For more safety

Carbon Tec provides the best possible protection. The high-performance carbon material is used in the inmold process. The integrated carbon plates in the outer shell make the helmet more robust. Forces acting on the helmet at certain points are absorbed by the carbon fibres, distributed over a larger area and thus mitigated.

All Alpina helmets manufactured using the inmold process are fitted with a robust ceramic shell. A polycarbonate plate is stretched under intense heat onto the shape of the helmet in the making and pressed onto the Hi-EPS body under high pressure and thermally bonded to it. The Ceramic shell is characterized by several qualities: It is impact- and scratch-resistant, UV-stable and antistatic.

Edge Protect is an additional polycarbonate plate that give inmold helmets a touch of refinement. It covers the edges on the underside of the helmet. This protects the Hi-EPS and increases the helmet's durability. At the same time, the wearer's neck and shoulder area is protected from injury by the helmet in the event of an impact and contact with the bottom edge of the helmet.

Hardshell helmets consist of a Hi-EPS core and an impact-resistant outer shell made of ABS or polycarbonate. This combination ensures maximum safety.

The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers that absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time allows for extra-thin helmet wall as well as narrow helmet shapes.

In the inmould production process, the polycarbonate upper shell is thermally bonded to the Hi-EPS inner shell of the helmet body under intense heat and pressure. This creates a large and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Twin Shell is a second polycarbonate shell that pulls over the entire helmet as a grid structure between the upper shell and the EPS body, and braces the helmet. The inmold process thermally connects the second shell so that it cannot be separated from the outer shell or the Hi-EPS of the helmet body – ensuring the best possible pressure distribution.

Choose a language