Chat with us, powered by LiveChat

CARAPAX 2.0, Bike helmet

CARAPAX 2.0
CARAPAX 2.0
CARAPAX 2.0
CARAPAX 2.0
  • The smooth-running and supple Ergo Flex run system guarantees maximum comfort.
  • Thanks to the Seamless Connection, the Edge Protect lower edge protection nestles seamlessly into the upper shell
  • Exclusive MichaelCina design
  • The rear and temple sections are lowered for optimum protection in off-road conditions
  • Grilles in the front vents keep insects away from the head
€139.95 RRP

Colour: michael cina white gloss

Größe

Reset selection
Not available online?
Find the right Alpina dealer near you!
Vendor search
CARAPAX 2.0
Order number: A9725112 The Carapax 2.0 from Alpina is at home on the trails. With this revised version of the successful... more
CARAPAX 2.0
Order number: A9725112
The Carapax 2.0 from Alpina is at home on the trails. It is always the right choice. Whether uphill or downhill. It is an all-rounder in the off-road sector and is a visual highlight in the MichaelCina version. The Run System Ergo Flex ensures maximum comfort and safety. The adjustment system impresses with its filigree construction and fixes the helmet evenly on the head in a 360 degree circumference. There is no more individual, smooth and comfortable way to adjust a bicycle helmet. Another plus for comfort: the removable padding. With it, you always feel comfortable - no matter how hot it gets in the terrain. The low weight of the Carapax 2.0 comes from the Inmold production, in which the upper shell is thermally bonded to the Hi-EPS. This results in a firm surface connection, which is responsible for a very stable construction. The lower edge of the helmet is protected by the Edge Protect polycarbonate shell. Thanks to the Seamless Connection, it nestles seamlessly against the upper shell. For the highest possible safety on rough trails, the rear and the temple area are pulled further down. This creates even greater head coverage. Large vents allow for optimal ventilation, fly screens keep insects away from the head, and the height-adjustable shield guarantees additional protection in the viewing area.
Technologies
Airflow Venting
Airflow Venting

One factor that greatly influences comfort when wearing is the ventilation of the helmet. The strategically sensible arrangement of the vents is crucial for optimum ventilation of the interior. The air is directed into the interior, guided around the head and can flow out again at the back. The head is therefore comfortably air-conditioned at all times.

Ceramic Shell
Ceramic Shell

All Alpina helmets manufactured using the inmold process are fitted with a robust ceramic shell. A polycarbonate plate is stretched under intense heat onto the shape of the helmet in the making and pressed onto the Hi-EPS body under high pressure and thermally bonded to it. The Ceramic shell is characterized by several qualities: It is impact- and scratch-resistant, UV-stable and antistatic.

Custom Fit
Custom Fit

Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several steps. This allows the optimal fit of the helmet to be adjusted for a wide variety of head shapes. Pressure marks are a thing of the past, the helmet sits perfectly on the head and safety is improved.

Edge Protect
Edge Protect

Edge Protect is an additional polycarbonate plate that give inmold helmets a touch of refinement. It covers the edges on the underside of the helmet. This protects the Hi-EPS and increases the helmet's durability.

Ergomatic
Ergomatic

Proven a hundred thousand times over and used on all Alpina helmets: the strap buckle with the red push button and multi-step automatic locking mechanism. Ergomatic can be operated with one hand - you can loosen the strap on the way up the mountain and tighten it for downhill - and in a fall the locking mechanism cannot open automatically.

Hi-EPS
Hi-EPS

The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers that absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time allows for extra-thin helmet wall as well as narrow helmet shapes.

Inmold
Inmold

In the inmould production process, the polycarbonate upper shell is thermally bonded to the Hi-EPS inner shell of the helmet body under intense heat and pressure. This creates a large and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Run System Ergo Flex
Run System Ergo Flex

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The Run System Ergo Flex is the lightest, most comfortable adjustment system offered by Alpina. The delicate design clings evenly to the head and thus increases protection. The Run System Ergo Flex can be adjusted using fine increments – there’s no helmet more lightweight, more comfortable or with a more custom fit.

Y-Clip
Y-Clip

A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixing of the two straps under the ear plays a decisive role. The Y-clip system ensures a millimetre-accurate adjustment - in a matter of seconds.

TECHNICAL SPECS_
Weight
270 Gram
Area of application
enduro, MTB
Standards
EN 1078:2012 + A1:2012
Helmet light
Nein
Woher kommst Du? / Where are you from?