PICO, Bike helmet

PICO
PICO
PICO
PICO
  • Durable outer shell thanks to the 3 shell construction
  • Individual helmet adjustment thanks to tilting adjustment system on back of head
  • Easy-to-operate belt buckle with a twist-proof, multi-step automatic buckle
  • Low weight thanks to the inmold production where the upper shell is thermally connected with the Hi-EPS
  • Optimal impact-absorption thanks to Hi-EPS material made of microscopic air chambers
€44.95 RRP

Colour: pearlwhite butterflies gloss

Size:

Reset selection
Not available online?
Find the right Alpina dealer near you!
Vendor search
PICO
Order number: A9761110 The ALPINA PICO is a bike helmet for kids and youths. The inmold construction, fly screen, plenty... more
PICO
Order number: A9761110
The ALPINA PICO is a bike helmet for kids and youths. The inmold construction, fly screen, plenty of ventilation openings and the high-quality adjustment system make the helmet safe and comfortable to wear. The built-in visor on the ALPINA PICO is particularly striking, offering protection from direct sunlight and extra safety in the event of a fall. Three ventilation openings are integrated into it to prevent heat build-up. Another twelve ventilation openings ensure that the head is well ventilated, even on especially hot days. Fly screens on the front keep insects from wandering into the helmet. The Run System Ergo Flex+ provides comfort and optimal adjustment possibilities. The light and delicate design clings evenly to the head and thus increases protection. The Run System can be adjusted by means of a fine ratchet system. Thanks to the inmold construction, with which the Hi-EPS inner shell under the outer shell is foamed under high pressure and heat, the ALPINA PICO FLASH is lightweight yet secure.
Technologies
Airflow Venting
Airflow Venting

One factor that greatly influences comfort when wearing is the ventilation of the helmet. The strategically sensible arrangement of the vents is crucial for optimum ventilation of the interior. The air is directed into the interior, guided around the head and can flow out again at the back. The head is therefore comfortably air-conditioned at all times.

Ceramic Shell
Ceramic Shell

All Alpina helmets manufactured using the inmold process are fitted with a robust ceramic shell. A polycarbonate plate is stretched under intense heat onto the shape of the helmet in the making and pressed onto the Hi-EPS body under high pressure and thermally bonded to it. The Ceramic shell is characterized by several qualities: It is impact- and scratch-resistant, UV-stable and antistatic.

Custom Fit
Custom Fit

Custom Fit is an adjustment system at the back of the head that allows you to adjust the height of the Run System in several steps. This allows the optimal fit of the helmet to be adjusted for a wide variety of head shapes. Pressure marks are a thing of the past, the helmet sits perfectly on the head and safety is improved.

Ergomatic
Ergomatic

Proven a hundred thousand times over and used on all Alpina helmets: the strap buckle with the red push button and multi-step automatic locking mechanism. Ergomatic can be operated with one hand - you can loosen the strap on the way up the mountain and tighten it for downhill - and in a fall the locking mechanism cannot open automatically.

Hi-EPS
Hi-EPS

The inner shell of all Alpina helmets is made of Hi-EPS (High Expanded Polystyrene). The material has microscopically small air chambers that absorb the forces acting on the helmet in the event of an impact. Hi-EPS provides optimum protection and at the same time allows for extra-thin helmet wall as well as narrow helmet shapes.

Inmold
Inmold

In the inmould production process, the polycarbonate upper shell is thermally bonded to the Hi-EPS inner shell of the helmet body under intense heat and pressure. This creates a large and inseparable connection between the upper and lower shell. Advantage: The helmet is very light and at the same time extremely stable.

Run System Ergo+
Run System Ergo+

The Run System enables all Alpina helmets to adjust to a custom size by using an easy-to-move dial. The valuable Run System Ergo+ has two large wing-shaped head supports that make it comfortable to wear. The difference from the Run System Ergo Pro: the head supports do not have rubber coating.

Y-Clip
Y-Clip

A helmet can only provide the best possible protection if it remains in the optimum position in the event of an impact. The adjustment and fixing of the two straps under the ear plays a decisive role. The Y-clip system ensures a millimetre-accurate adjustment - in a matter of seconds.

TECHNICAL SPECS_
Weight
240 Gram
Area of application
allround, city, inline skating, Junior/Kids, MTB, touring, urban
Standards
EN 1078:2012 + A1:2012
Helmet light
optional
Woher kommst Du? / Where are you from?